Steel Channel/track and stud

1)Smooth, attractive finish 2)Tight tolerances 3)Sharp contours 4)Different materials availabld Steel Channel/track and stud

Steel Channel/track and stud

Galvanized steel section for use as the standard head and in non-load bearing partition systems.

1. Our Light-steel Keel is made of galvanized steel sheet with good rust-Proof function.The thickness is strictly according to the international demand.

 

2. During production of the keels, it's favourable to set some fillisters and cams in both sides of the keels in a selective way, in order to strength the keels' vertical points and intensity.

 

3.One of our merits is the special hole for channel on C-stud in per 6Ocm which is easy for workers to install the electric lines and water tubes.

 

4.When intalling the plaster splint, our keels are easy to fix  up, which is not only good for implaster splints and the keels as well as the whole constructure's intensity.CH and IH type of studs are the special type we developed to solve the difficult situation in elevator ventilator and offer a better protection of workers' safety.

 

5.Our light steel keels are in all kinds of types, we are able to manufacture German, Japan and Aus-American types etc, and we are capable of producing any special types of products and developing new products.

PRODUCT NAME	PRODUCT MARK	DEMENSION(MM)	REMARKS
COVERING CHANNEL	DC60	60*27*0.6	LENGTH CAN BE PROVIDED BY CUSTOMER'S REQUEST
	DC50	50*19*0.5
	DC50	50*19*0.6
SUPPORTING CHANNEL	DU60	60*27*1.2
	DU50	50*15*1.2
	DU38	38*12*1.0
COVERING CHANNEL	QU	50*40*0.6
		75*35*0.6
		100*35*0.6
		150*40*0.6
SUPPORTING CHANNEL	CU	50*45*0.6
		75*45*0.6
		100*45*0.6
		150*45*0.6

 

Steel Channel/track and stud